Dialogic Brooktrout TR1034 BRI Manual do Utilizador descarregar pdf (Página 27)

RightFax 8.5 Fax Board Guide 27

Chapter 4

Dialogic Digital Fax Boards

efore installing any fax board into the RightFax server, you must first configure the board to

operate correctly and without hardware conflicts. If you are installing multiple fax boards of the

same or different types, watch for special notes specific to such instances. Be sure to record the

I/O addresses, DMA channels, and interrupts selected for each installed fax board; you may need

this information when configuring the fax boards in RightFax.

Do not load any Dialogic® software included with the fax board. RightFax software includes all the

necessary drivers and programs for your fax board.

Warning Static discharge can severely damage your fax board. Exposing your fax board to static electricity

will void all warranties on the board. Always use caution when handling fax boards.

Installing Dialogic Digital Fax Boards

Supported Dialogic digital fax boards include models with up to 32 channels for T1, E1, or PRI-

ISDN telephone lines. Instructions in this chapter apply to all supported Dialogic digital fax boards

unless otherwise noted. If you are installing Dialogic analog fax boards, see ”Installing Dialogic

Analog Fax Boards” on page 21.

Warning RightFax versions 8.5 and later do not support the CP6/SC, CP12/SC, or CP4/SC PEB bus Dialogic

digital fax boards. If you already have one or more of these fax boards installed, do not upgrade the

RightFax server to version 8.5 or later.

The following table lists all of the Dialogic digital fax boards supported by RightFax.

Dialogic digital fax boards may require new I/O settings or other configuration settings in order to

work with your specific phone line type. For more information, refer to the documentation included

with your digital fax board.

Table 4A Supported Dialogic Digital Fax Boards

Board model Description

Connect to

NIC via

CPi/200 BRI 2 channel ISA fax board with ISDN BRI support. N/A

CPi/2400CT-T1

24 channel ISA digital fax board with built-in T1 and PRI-ISDN

interface.

N/A

CPi/3000CT-E1

30/32 channel ISA digital fax board with built-in E1 and PRI-ISDN

interface.

N/A

CPi/400 BRI 4 channel ISA fax board with ISDN BRI support. N/A

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Sem comentários

Dialogic Brooktrout TR1034 BRI Manual do Utilizador Página 27