Dialogic Brooktrout TR1034 BRI Manual do Utilizador descarregar pdf (Página 21)

RightFax 8.5 Fax Board Guide 21

Chapter 3

Dialogic Analog Fax Boards

efore installing any fax board into the RightFax server, you must first configure the board to

operate correctly and without hardware conflicts. If you are installing multiple fax boards of the

same or different types, watch for special notes specific to such instances. Be sure to record the

I/O addresses, DMA channels, and interrupts selected for each installed fax board; you may need

this information when configuring the fax boards in RightFax.

Do not load any Dialogic® software included with the fax board. RightFax software includes all the

necessary drivers and programs for your fax board.

Warning Static discharge can severely damage your fax board. Exposing your fax board to static electricity

will void all warranties on the board. Always use caution when handling fax boards.

Installing Dialogic Analog Fax Boards

Supported Dialogic analog fax boards include models with up to four loop-start or DID channels.

Instructions in this chapter apply to all supported Dialogic analog fax boards unless otherwise

noted. (If you are installing Dialogic digital fax boards, see Chapter 4, ”Dialogic Digital Fax Boards”.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Sem comentários

Dialogic Brooktrout TR1034 BRI Manual do Utilizador Página 21