Dialogic Brooktrout TR1034 BRI Manual do Utilizador descarregar pdf (Página 17)

RightFax 8.5 Fax Board Guide 17

Chapter 2

Brooktrout Digital Fax Boards

efore installing any fax board into the RightFax server, you must first configure the board to

operate correctly and without hardware conflicts. If you are installing multiple fax boards of the

same or different types, watch for special notes specific to such instances. Be sure to record the I/

O addresses, DMA channels, and interrupts selected for each installed fax board; you may need this

information when configuring the fax boards in RightFax.

Warning Static discharge can severely damage your fax board. Exposing your fax board to static electricity

will void all warranties on the board. Always use caution when handling fax boards.

Supported Brooktrout TR1034 Series Digital Fax Boards

The TR1034 family of digital fax boards consists of models with up to thirty channels for T1, E1, or

PRI-ISDN telephone lines. Instructions in this chapter apply to all supported TR1034 digital boards

unless otherwise noted. If you are installing analog fax boards, see ”Installing Brooktrout TR1034

Series Analog Fax Boards” on page 7. RightFax currently supports the following TR1034 series

digital fax boards.

Because either a T1 or E1 network interface is built into each of these boards, no external network

interface card (NIC) is required.

Table 2A Supported TR1034 Series Digital Fax Boards

Board model Description

TR1034-P16H+E1 16 channel PCI digital fax board with built-in E1 interface.

TR1034-P24H+T1 24 channel PCI digital fax board with built-in T1 interface.

TR1034-P30H+E1 30 channel PCI digital fax board with built-in E1 interface.

TR1034-P8H+E1 8 channel PCI digital fax board with built-in E1 interface.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Sem comentários

Dialogic Brooktrout TR1034 BRI Manual do Utilizador Página 17