Dialogic DSI SS7MD Manual do Utilizador descarregar pdf (Página 73)

Dialogic

DSI Signaling Server SGW Mode User Manual Issue 5

Prerequisites

The specified NTPSER must not already be configured.

The IPADDR may not be used more than once and may not identify any of the configured system IP

addresses.

Up to 16 NTP servers may be configured.

Attributes

CONFIG - The command affects configuration data.

Example

CNTPI:NTPSER=1,IPADDR=192.168.0.1,LABEL=NTPSERV1;

6.5.33 CNTPP – Configuration Network Time Protocol Print

Synopsis

This command is used to display the configuration of the Network Time Protocol software on the unit.

Syntax

CNTPP;

Prerequisites

None.

Attributes

None.

Example

CNTPP;

Configuration of NTP Servers

NTPSER IPADDR LABEL

1 192.168.0.1 NTP server 1

2 192.168.0.2 NTP server 2

EXECUTED

6.5.34 CNTSP – Configuration Timeslot Print

Synopsis

This command is used to print the configuration of all timeslots on a PCM.

A timeslot on a PCM can be allocated to signaling, voice, cross connect, or monitoring or it can be

unallocated. Data is printed for a timeslot when it is acting as an outgoing timeslot.

A timeslot can act as an outgoing timeslot for the following types:

• SIG - Carries signaling information. It forms a duplex connection.

• OTS - Acts as an outgoing timeslot for a cross connection. It may form a duplex connection.

• STS - The outgoing timeslot monitoring the send direction of an object.

• RTS - The outgoing timeslot monitoring the receive direction of an object.

Note: An object is currently only a signaling link.

For signaling, the STS monitors information sent from the EQU of the signaling link and the RTS monitors

information received by the signaling link.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 175 176

Sem comentários

Dialogic DSI SS7MD Manual do Utilizador Página 73