Dialogic 4000 SERIES Manual do Utilizador descarregar pdf (Página 99)

Use Case Examples

Page 99

Use Cases for Microsoft

Office Communications Server 2007

The following scenarios describe common configurations for the gateway computer with one Dialogic

Diva

V-2PRI Media Board and the Diva SIPcontrol installed. The scenarios assume that the gateway computer is based

in Germany.

• U

sing the Gateway Computer Between the PBX and Microsoft® Office Communications Server 2007: Both

lines of the Diva Media Board are connected between the PBX and the Microsoft

Office Communications

Server 2007.

• Using the Gateway Computer Between the PBX/PSTN and Microsoft® Office Communications Server 2007:

One line of the Diva Media Board is connected to the PBX and one line is connected directly to the PSTN. The

gateway computer is connected to the Microsoft

Office Communications Server 2007.

• Using the Gateway Computer Between the PSTN and PBX/Microsoft® Office Communications Server 2007:

One line of the Diva Media Board is connected to the PBX and one line is connected to the PSTN. The gateway

computer is connected between the PSTN and the PBX. The Microsoft

Mediation Server is installed on the

gateway computer.

Using the Gateway Computer Between the PBX and Microsoft

Office Communications Server 2007

This configuration scenario describes the necessary steps for configuring the gateway computer between the

PBX and the Microsoft

Office Communications Server 2007, as shown below:

For this configuration scenario, one dialplan, the PSTN interface, the network interface, one SIP peer, and one

route need to be configured.

1. Open the Diva SIPcontrol web interface to configure the required parameters. To do so, click Start >

Programs > Dialogic Diva > SIPcontrol Configuration.

2. In the Diva SIPcontrol web interface, click Board configuration on the left hand side to open the Available

Diva Boards page.

3. Click either the board icon or the name of the Diva Media Board to open the Board Configuration - Detail

page.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 167 168

Sem comentários

Dialogic 4000 SERIES Manual do Utilizador Página 99