Dialogic DMG1000 Manual do Utilizador

Integration Title Digital Media Gateway using AnalogDocument dmg100-analog-sip-inLast update 2012/09/17DuVoice Versions 5.XXSwitch Versions N/A Tab

Minimum Call Party Delay (ms)Set to 0.Maximum call Party Delay (ms)Set to 0.MWI SettingsUse these settings for either option one or two.Turn MWI On FA

TDM > CPID ParsingThese settings are for Avaya Definity. These values are from the configuration file available by Dialogic distributed in the fir

VoIP > Network GroupsAll fields should remain as default shown here. Copyright 2012 DuVoice Corporation

VoIP > Media Copyright 2012 DuVoice Corporation

Voice Activity DetectionSet to off. Setting this value to off will reduce clipping during audio recordings on calls with low db levels. VoIP > Aut

DuVoice ConfigurationLinesExtension numberSet the extension number for each line to a matching number associated with an extension located on the DMG.

Enable RegisterDo not check the Register field for any line.SIP Configuration Copyright 2012 DuVoice Corporation

Registrar addressSet the registrar address to the IP address of the DMG. Registrar expire timeSet the Register expire time to what the DMG is configur

MethodSet to SIP for both MWI On and MWI Off templates. You may need this set to SIP+PMS if MWI should be sent to the PMS as well as the PBX.Do not e

System ConfigurationMailbox Administration Copyright 2012 DuVoice Corporation

PBX ConfigurationAvaya ACM/DefinityEnable Adjunct Supervision for each analog port connected to the DMG. MitelEnable System Option 22 (Last Party Clea

Client IP AddressSet the IP settings to match the network. Mgmt ProtocolsAll fields should remain as default shown here.Routing TableAll fields shoul

Routing Table > VoIP Host GroupsIn order to route calls to the DuVoice system the IP address must be entered under VoIP Host Groups. Copyright 20

VoipGroup-1Enter the IP address of the DuVoice system. TDM > AnalogThe DMG can be configured to integrate in two ways. The first is for the DMG to

Loop Current Off Debounce(ms)Set to 5000.Auto-Answer Inbound TDM Calls (Type II CPID)Set to Yes.TDM > General Copyright 2012 DuVoice Corporation

Minimum Call Party Delay (ms)Set to 2000.Maximum call Party Delay (ms)Set to 5000. You may need to increase this value depending on your integration.

Loop Current Off Debounce(ms)Set to 5000.Auto-Answer Inbound TDM Calls (Type II CPID)Set to No.TDM > General Copyright 2012 DuVoice Corporation