Dialogic 4000 SERIES Manual do Utilizador descarregar pdf (Página 93)

Use Case Examples

Page 93

CHAPTER 14

Use Case Examples

Diva SIPcontrol is designed to support standard VoIP RFCs, therefore, the usage of Diva SIPcontrol is not limited

to the described use case samples below. Diva SIPcontrol is interoperable with many applications, e.g., Asterisk

or e-phone.

The following scenarios describe configurations for a gateway computer with:

• Dialogic

Host Media Processing (HMP) software

•Microsoft

Exchange Server

•Microsoft

Office Communications Server

•Lync Server

The gateway computer is a server with a Diva Media Board and Diva SIPcontrol installed. The use cases are

based on Diva SIPcontrol version 2.5.

Use Case for Dialogic

HMP Software

This use case describes the usage of the Dialogic

Host Media Processing (HMP) software running on the same

computer as the Diva Media Board and Diva SIPcontrol, as shown in the graphic below. However, Diva SIPcontrol

also supports the interoperability with HMP over the LAN. The use case is based on HMP version 3.0WIN and

3.1LIN. In order for the application based on the Dialogic

Global Call API to connect with Diva SIPcontrol, it

needs to be set to listen on port 5060 and to send SIP messages to the IP address 127.0.0.1 on port 9803.

For this configuration scenario, the network interface, one SIP peer, and two routes need to be configured.

To configure Diva SIPcontrol to function with your Global Call application:

1. Open the Diva SIPcontrol web interface to configure the required settings. To do so, click Start > Programs

> Dialogic Diva > SIPcontrol Configuration.

2. In the Diva SIPcontrol web interface, click SIPcontrol configuration on the left hand side to open the

SIPcontrol Configuration page.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 167 168

Sem comentários

Dialogic 4000 SERIES Manual do Utilizador Página 93