Dialogic 4000 Series SU4.1 Manual do Utilizador descarregar pdf (Página 183)

Use Case Examples

175

Under Called address rules, configure the following parameters:

 Address Condition: Enter the called address condition as shown in the graphic

above. This condition matches all calls to 192.168.212.138, which is the IP address

of the FSX ATA.

 Address Result: Enter the called address result as shown in the graphic above,

with the FDQN of the SBA after the @ sign. This address result converts the

matched called addresses to a form accepted by the Lync Server.

 Under Calling address rules, configure the following parameters:

 Address Condition: Enter the calling address condition as shown in the graphic

above. This condition matches all calls from 192.168.212.138, which is the IP

address of the FXS ATA.

 Address Result: Enter the calling address result as shown in the graphic above,

with the FDQN of the SBA after the @ sign. This address result converts the

matched calling addresses to a form accepted by the Lync Server.

Click OK to save the settings and close the window.

14.

Under PSTN Interfaces, configure both Controller 1 and Controller 2 with PSTN-

specific settings. The controller numbers that you configure with PSTN-specific settings

needs to correspond to the line numbers in the Diva Configuration Manager on which

you configured the switch type of your PSTN lines.

To configure PSTN-specific parameters for Controller 1, click Details to the right of the

respective controller, and configure the following parameters:

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 225 226

Sem comentários

Dialogic 4000 Series SU4.1 Manual do Utilizador Página 183