Dialogic 4000 Series SU4.1 Manual do Utilizador descarregar pdf (Página 102)

Dialogic 4000 Media Gateway Series SU4.1 Reference Guide

Configure the outside access digit only if there is a PBX between the PSTN and Diva

SIPcontrol, and if this PBX requires the outside access digit for external calls. For

information on configuring the outside access digit, see Important Information about the

Outside Access Digit Configuration.

Diva SIPcontrol's number normalization function does not remove outside access digits like

a PBX can for external calls. If Diva SIPcontrol needs to behave like a PBX with an outside

access digit for external calls, use the address map functionality in combination with a

route.

Steps for Number Normalization Based on a Dialplan

Number normalization based on a dialplan is done in two steps:

1. The received called, calling and redirected numbers are analyzed based on the

dialplan configured for the PSTN Interface or SIP Peer.

2. The number is converted into the configured target result. Six target results are

available:

 International number with prefixes: All numbers are converted to an

international number with the prefix for international calls and, if required, an

outside access digit.

 International number with number type: All numbers are converted to an

E.164 number with the number type flag set to "international" ("+" is used in

SIP addresses).

 National number with prefixes: If possible, all numbers are converted to a

national number with the prefix for national calls and an outside access digit,

as required. Exception: Numbers with a different country code will be

converted to an international number with a prefix for international calls and

an outside access digit, if required.

 National number with number type: If possible, all numbers are

converted to a national number with the number type flag set to "national".

Exception: Numbers with a different country code will be converted to an

international number with the number type set to "international". Note: This

target result should not be used for calls to SIP networks.

 Extension only with prefixes: All numbers are reduced as much as

possible; only the required prefixes are prepended.

 Extension only with number type: All numbers are reduced as much as

possible. Instead of prefixes, the appropriate number type is set. Note: This

target result should not be used for calls to SIP networks.

Number Modification Using Address Maps

Diva SIPcontrol organizes regular expressions into address maps, and each endpoint or

route can be assigned one map. Each address map contains a number of regular

expressions together with the respective output result strings. This helps to ensure that

virtually every required manipulation scheme can be configured.

By using separate address maps instead of rules embedded into the routes and endpoints, it

is possible to share the same settings across different objects. For example, if several PSTN

interfaces are connected to the same PBX, they will probably be configured with the same

settings. Therefore, these PSTN interfaces can share a single address map that Diva

SIPcontrol lets you assign for each individual controller.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 225 226

Comentários a estes Manuais

Sem comentários

Dialogic 4000 Series SU4.1 Manual do Utilizador Página 102

Comentários a estes Manuais

Manuais e produtos relacionados com Gateways/controladores Dialogic 4000 Series SU4.1