
Configuring the Dialogic Media Gateway Configuring the Dialogic Media Gateway
6UCSTN0088-4A Copyright © 2012 ADTRAN, Inc. 5
4. Press the ENTER key until the following prompt appears:
PIMG>
5. At the prompt, enter pwd and press the ENTER key.
6. When prompted, enter the password for the administrator (the default is IpodAdmin) and press the
ENTER key.
7. At the resulting prompt, enter quickcfg and press the ENTER key.
8. Enter the following parameters when you are prompted:
• Client IP address: Enter the IP address that you want to assign to the media gateway.
• Client Subnet Mask: Enter the subnet mask that you want to assign to the media gateway.
• Default Network Address: Enter the IP address of the default network router.
• Select Operating Mode: Enter SIP.
• PBX Type: Enter the value that corresponds to your PBX.
9. Enter restart at the PIMG> prompt and press the ENTER key.
Accessing and Performing the Initial Configuration for the DMG2000 Series using the
Serial Interface
To access and perform the initial configuration for the DMG2000 series using the serial interface, follow
these steps:
1. Connect the serial cable to the COM 2 connector on the media gateway, and connect the other end to
the serial connector on your PC.
2. Using a terminal emulation program such as HyperTerminal, create a connection using the following
parameters:
• Baud rate: 115200
• Parity: None
• Data Bits: 8
• Stop Bits: 1
• Hardware Flow Control: Off
3. Select Connect.
4. Press the ENTER key until the following prompt appears:
PIMG>
5. At the prompt, enter pwd and press the ENTER key.
6. When prompted, enter the password for the administrator (the default is IpodAdmin) and press the
ENTER key.
7. At the resulting prompt, enter quickcfg and press the ENTER key.
8. Enter the following parameters when prompted:
• Client IP address: Enter the IP address that you want to assign to the media gateway.
• Client Subnet Mask: Enter the subnet mask that you want to assign to the media gateway.
• Default Network Address: Enter the IP address of the default network router.
Comentários a estes Manuais