Dialogic INTEGRATED MEDIA GATEWAYS 1010 Manual do Utilizador

September 2008 www.dialogic.com Dialogic® IMG 1010/1004 Integrated Media Gateways Radius Release 10.3.x / 10.5.x

7 Generic RADIUS Attributes Topic Location: Product Description > RADIUS RADIUS Attributes carry the specific authentication, authorization, info

RADIUS 8 RADIUS server. For example, a fully qualified domain name would be suitable as a NAS-Identifier. 40 Acct-Status-Type Numeric (4 octets) Val

Generic RADIUS Attributes 9 48 Acct-Output-Packets Numeric (4 octets) 0 This attribute indicates how many packets have been sent to the port in the

11 RADIUS Call Flow: SS7 to SIP Topic Location: Product Description > RADIUS

13 RADIUS Call Flow: SS7 to H.323 - Release from SS7 Topic Location: Product Description > RADIUS

15 Incomplete Call Behavior Topic Location: Product Description > RADIUS This section outlines the behavior of the IMG gateway in case of the mos

17 Configuring RADIUS Topic Location: Configuration > RADIUS You can configure a total of 256 RADIUS servers. Before You Begin Make sure you have

RADIUS 18 Configuring a RADIUS Accounting Server 1. Right-click External Network Elements and select New Radius Servers. 2. Right-click Radius

Configuring RADIUS 19 Configuring a RADIUS Client 1. Right-click the desired Physical IMG and select New Radius Client. The Radius Client pane ap

21 Configuring Free RADIUS using GCEMS as a RADIUS Server Topic Location: Configuration > RADIUS The IMG runs a RADIUS client that is configured

Copyright and Legal Notice Copyright © 2005-2008 Dialogic Corporation. All Rights Reserved. You may not reproduce this document in whole or in part w

RADIUS 22 4. Add access for each IMG Edit the freeRadius clients.conf file (/etc/raddb/clients.conf) If you have multiple IMG’s, the Username s

Configuring Free RADIUS using GCEMS as RADIUS Server 23 10. Archive & delete CDR detail files. A copy of the following files can be found at

25 Radius Client Topic Location: ClientView Pane Reference Overview Description This pane configures a Radius Client for a single Physical IMG. Befo

RADIUS 26 Field Descriptions Radius Client Network Interface This drop-down list is populated with all of the Network Interfaces configured on this p

RADIUS Client 27 RADIUS Time Format This setting determines the format that will be used in CDR in attributes that include time.  Legacy Format Th

29 Radius Server Topic Location: ClientView Pane Reference Overview Description Use this pane to configure information about the Radius Servers that

RADIUS 30 Radius Server Data Format  Cantata Format Radius Server IP Address The IP Address of the Radius Server. Radius Server Port The port on

31 Radius Servers Topic Location: ClientView Pane Reference Overview Description To create a Radius Server, right-click Radius Server and select New

Hardware Limited Warranty Warranty for Hardware Products: Dialogic Corporation or its subsidiary that originally sold the hardware product ("Di

v Table Of Contents An Overview of RADIUS on the IMG...1 RADIUS Scenarios ...

1 An Overview of RADIUS on the IMG Topic Location: Product Description > RADIUS Overview The IMG uses Remote Authentication Dial In User Service

RADIUS 2 RADIUS Server Redundancy The IMG supports an Active/Standby redundancy scheme. Redundancy logic is independent for Authentication and Account

Overview of RADIUS 3 RADIUS Server Failure Alarm The IMG provides automatic alarming notification to IMG users when a Radius Server has changed states

5 RADIUS Scenarios Topic Location: Product Description > RADIUS The IMG supports RADIUS Authentication and Accounting. IMG customer has the optio

RADIUS 6 Authentication only In this case only an Authentication Server is assigned to the RADIUS client on the IMG.