Dialogic Brooktrout TR1034 BRI Guia do Utilizador descarregar pdf (Página 27)

INSTALLING BROOKTROUT DRIVERS ON WINDOWS

Then expand the IP Call Control Modules node in the tree view, and select H.323. In the right pane, open the

IP Parameters tab, and enter the default gateway as shown below:

5. (if you selected SIP in the IP Stack dialog box) To configure the Brooktrout SIP stack to run on the board,

expand the Call Control Parameters node in the tree view, click the fax board item (e.g. Module 0x2:

TR1034...), open the Ethernet/IP Port tab in the right pane, select SIP in the IP Call Control Module combo

box, and enter the IP Address of the TR1034 board as shown below:

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 94 95

Sem comentários

Dialogic Brooktrout TR1034 BRI Guia do Utilizador Página 27